Flexible and Modular System
Its basic component is an ultra-compact, electrical, frequency and temperature calibrator and HART communicator, which provides simultaneous measurement and source capabilities with a fully featured HART digital interface. Pressure measurement is provided by interchangeable pressure modules that can be attached to the calibrator by a pressure module carrier. If pressure generation is required the calibrator and pressure module can be attached to one of three pressure generation stations, to form a fully-integrated pressure calibrator, of unparalleled performance.
The simple yet sophisticated design and concept combines, for the first time, an advanced electrical calibrator with state-of-the-art pressure measurement and generation, so that there is no longer any need to compromise one measurand capability in favour of another.
Compact and Powerful
The DPI 620 electrical calibrator can measure and source mA, mV, V, Ohms, frequency and a variety of RTDs and T/Cs. It provides an isolated 24 V loop power supply to energise devices and control loops and a stabilized dc voltage supply for ratio metric transducers.
The high resolution, color touch screen of the calibrator shows only those buttons necessary for the immediate, selected tasks. The buttons have been sized so that they can be operated by a gloved hand, with no need for a stylus. The display can be configured to show up to six reading windows and can show electrical and temperature inputs and outputs, two pressure module readings, an IDOS pressure measurement, and a USB-connected device, as well as a HART summary window or full HART communicator with active mA measurement and actual primary variable readings.
High-performance HART Communicator
The DPI 620 multifunction calibrator now incorporates a fully featured HART® communicator which surpasses market leading communicators in functionality, ease of use and upgrade support such that a single hand held device can now configure the full range of HART devices and perform mA trims and sensor calibrations without the need for secondary equipment such as ammeters, calibrators, power supplies and loop resistors. This can significantly reduce equipment inventory, cost of ownership and greatly simplify maintenance activities The DPI 620 contains the latest application software and a complete library of registered HART device descriptions.
The Windows CE-driven version of the electrical calibrator provides all the computing power of a conventional hand-held PC or PDA. It provides standard Windows file management and offers popular Windows features to allow users to create text documents and view common file types including Excel, Power Point, Word, pdf and images. This means that operators can consult user manuals, training presentations, data sheets, installation drawings etc while in the field or on the plant. The four basic system components are available with ATEX and IEC approval for use in hazardous areas. This provides a flexible and expandable system that can be configured and operated safely in areas with potentially explosive atmospheres.
DPI 620 CE with WiFi*
The DPI 620 CE version can be further enhance with wireless IEEE 802.11g communications. For the first time, in a calibrator of this type, it is possible to link to the Internet and remote networks in order to access information and to transfer data. This powerful feature will benefit service technicians who spend extended periods away from head office and for those who need instant access to data, safety information, system drawings, product datasheets etc., while on the move. It will also provide an interface to future system modules when a physical connection is a hindrance. *Not available with IS version
GE DRUCK DPI 620 IS Calibrator
DPI 620 IS - Advanced Modular Calibrator
The DPI 620 Series an ultra-compact electrical, temperature and frequency calibrator and HART communicator, which provides simultaneous measurement and source capabilities with a fully featured HART digital interface. It integrates with pressure modules and pressure generation stations to form uniquely capable pressure test and calibration systems. The Intrinsically Safe version of the DPI 620 Series is now available allowing configuration and multi-function calibration in hazardous areas. The ATEX and IECEx certification allows the instrument to be employed globally in Zone 0 areas. The certification also applies to the instrument’s battery pack, permitting hot swapping within hazardous locations. The approval now further extends the range of potential applications of the powerful communicator/calibrator, especially in the oil and gas and process sectors. As with all instruments in the DPI 620 family, the IS version is rugged and compact and weather-proofed to IP65.
Flexible and Modular System
Model DPI 620 IS
Intrinsically safe advanced modular calibrator
Model DPI 620 IS CE
Intrinsically safe advanced modular calibrator with Windows CE The DPI 620 IS/IS CE are supplied with a rechargeable NiMH battery P/N IO620IS-BATTERY, battery charger IO620IS-CHARGER and battery charging station IO620IS-CRADLE, test leads, calibration certificate, quick reference guide and CD with multilingual manuals.
Model MC 620
Pressure module carrier Supplied with G 1/8 female and 1/8 NPT female adaptors (2 of each).
Model MC 620 IS
Intrinsically safe pressure module carrier Model PM 620 "pressure range" and "type" Pressure module. Supplied with calibration certificate. e.g., PM 620 20 bar (300 psi) gauge Model PM 620 IS "pressure range" and "type" Intrinsically safe pressure module. Supplied with calibration certificate. e.g. PM 620 IS 20 bar (300 psi) gauge Model PV 621 Pneumatic pressure station 20 bar (300 psi)
Model PV 621 IS
Intrinsically safe pneumatic pressure station 20 bar (300 psi)
Model PV 622
Pneumatic pressure station 100 bar (1500 psi)
Model PV 622 IS
Intrinsically safe pneumatic pressure station 100 bar (1500 psi)
Model PV 623
Hydraulic pressure station 1000 bar (15000 psi)
Model PV 623 IS
Intrinsically safe hydraulic pressure station 1000 bar (15000 psi)
The PV 621, 622 and 623 are supplied with G1/8 female and 1/8 NPT female adaptors, carry strap, quick reference guide and CD with multilingual user manual. In addition, the PV 623 includes a plastic bottle for hydraulic fluid.