PRODUCTS


ALLEN BRADLEY PLC - Control logix

ROCKWELL AUTOMATION- CONTROL LOGIX

ALLEN BRADLEY PLC

Leveraging the Power of New or Existing HART Field Devices While Protecting Your Investments


Highway Addressable Remote Transducer (HART) input and output modules provide your process automation system with full analog capability and the benefit of HART protocol in an I/O module that can be used locally or mounted remotely. The modules off er 8 or 16 channels of analog input or output data with accompanying HART digital information.
If you have a process application that contains HART field devices, the Allen Bradley ControlLogix® HART modules enable you to leverage your existing instrumentation investment by allowing you to:
• Connect directly to HART devices without external HART multiplexers or extra wiring
• Provide access to more field device data, such as HART Primary Value, Secondary Value, Third Value, Fourth Value and device status information
• Manage HART devices individually that are connected directly to the modules
• Document the device wired to each channel Lowering Your Operating Costs The ControlLogix HART modules maximize your system performance by combining real-time HART data with standard analog data at a fraction of the cost.

Simplify commissioning, operation and maintenance with increased insight to device status. You can use the digital data as the foundation of your asset management system.

1756-IB32
1756 ControlLogix I/O Specifications
1756 Series Catalog Numbers
INPUT MODULE 10-31VDC 32POINT 36PIN CONTROLLOGIX


1786-RPFM
CONTROLNET MEDIUM-DISTANCE FIBER MODULE


836-C8E
836PRESSURE CONTROLS - GENERAL INDUSTRIAL


1756-RMC3
CONTROLLOGIX 3 M RM FIBER OPTIC CABLE


1492-SPM2C020
MCB SUPPLEMENTARY PROTECTOR 2 A


1756-L63
CPU MODULE 8MB MEMORY CONTROLLOGIX LOGIX5563


1756-CN2R/B
CONTROLNET REDUNDANT INTERFACE MODULE (100 CONNECTIONS)


2711P-K7C4D8
PANELVIEW PLUS TERMINAL


1756-IF16
ANALOG INPUT - CURRENT/VOLTAGE 16 PTS (36 PIN)


1762-IF4
4 CHANNEL CURRENT/VOLTAGE ANALOGUE INPUT MODULE


1762-OF4
MICROLOGIX 4 POINT ANALOG OUTPUT MODULE


1747-BA
LITHIUM BATTERY (FOR RAM MEMORY RETENTION) FOR PROGRAMMABLE CONTROLLER


1756-PAR2
85-265 VAC REDUNDANT POWER SUPPLY ASSEMBLY


1756-BA2
LITHIUM BATTERY (FOR USE WITH SERIES B 1756-L6X CONTROLLERS)


1756-L61
CPU MODULE 2MB MEMORY CONTROLLOGIX5561 1.2A 24VDC


1756-CPR2
CONTROLLOGIX REDUNDANT SUPPLY CABLE


1756-IF8
INPUT MODULE 8POINT ANALOG CONTROLLOGIX 40MA 24VDC


1761-NET-AIC
AIC+ ADVANCED INTERFACE CONVERTER RS-232 TO RS-485 CNVTR
2 RS-232 PORTS: 8-PIN MINI DIN & 9-PIN D-SHELL


1794-IE12
ANALOG INPUT MODULES
12 SINGLE-ENDED INPUT


1794-OE4
FLEX I/O ANALOGUE OUTPUT MODULE
12 BIT
4 POINT
1794-IA16
FLEX I/O 85-132V AC INPUT MODULE
16 POINT


1794-OW8
RELAY CONTACT OUTPUT MODULE
8 POINT ISOLATED


1794-TBNF
TERMINAL BASE
FUSED NEMA
SCREW CLAMP


1769-L35E
COMPACTLOGIX ETHERNET PROCESSOR
1.5MBYTE MEMORY


1769-PA2
120/240 VAC INPUT POWER SUPPLY 2 AMPS @ 5 VDC OUTPUT
1606-XLE240E
1606-XLE240E:ESSENTIAL POWER SUPPLY


1783-US8T
STRATIX 2000 SWITCH


1794-AENT
ETHERNET/IP 10/100 MBIT FLEX I/O ADAPTER MODULE (10BASET)


1502-V4DBDA-1
VACUUM CONTACTOR
FIXED MOUNTED
400A




The Allen Bradley ControlLogix® architecture provides a wide range of input and output modules to span many applications, from high-speed digital to process control. The Allen Bradley ControlLogix architecture uses Producer-Consumer technology, which allows input information and output status to be shared among multiple Allen Bradley ControlLogix controllers. Each Allen Bradley ControlLogix I/O module mounts in a Allen Bradley ControlLogix chassis and requires either a removable terminal block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately.


InstagramLinkedInYoutube